I have some Montgomery dogless #4 traps with bent levers due to time I guess. One so bad I can't set the trap anymore. Does anyone have a fix for them or does anyone sell replacements for them or will like victor or somebody else's levers work on them? What can I do about them?
Can't, no cam. Problem is the side the spring is on is twisted up. Was wondering if other levers would work or if revercing them would work. Found out that bridger #3 levers will work on #3 and 4 montys and #2 bridgers will work on #2 montys as well as the jaws also.
Post by sneakysnake on Mar 30, 2011 15:17:36 GMT -5
I have in the past had twisted levers on some #3's. I just clamped them in a vice and twisted them back in to shape. Also, if the are real bad, you may have to take the trap apart so you and straighten and then put a straight edge to the full length of the lever. Be patient, you can bring them back.