|
|
Post by deadwolf on May 4, 2011 11:50:58 GMT -5
I have one happy farmer. Caught this about 200 yds from his calf pen.  |
|
|
|
Post by robocop on May 4, 2011 20:02:48 GMT -5
Looking good what brand of trap is that??
|
|
|
|
Post by wolf1199 on May 4, 2011 20:24:57 GMT -5
nice catch deadwolf, the farmer can sleep better tonight
|
|
|
|
Post by deadwolf on May 4, 2011 21:23:54 GMT -5
Looking good what brand of trap is that?? It's a heavy modified victor #4 |
|
|
|
Post by fuzz269 on May 4, 2011 21:46:33 GMT -5
NICE, now I got odie withdrawls thanks alot lol
|
|
|
|
Post by deadwolf on May 4, 2011 22:41:32 GMT -5
lol anytime fuzz
|
|
|
|
Post by white316 on May 5, 2011 0:01:49 GMT -5
Do you have open season on yotes or is this just ADC work.
|
|
|
|
Post by deadwolf on May 5, 2011 7:46:51 GMT -5
Open season. Best part about it. I don't need a permit or license.
|
|
|
|
Post by fuzz269 on May 5, 2011 10:28:41 GMT -5
DeadWolf have you shown the pix of your #4 all modded up on this forum?? If not you should post the pix here, you do a great job of it, specialy that one that got crunched lol
|
|
|
|
Post by deadwolf on May 5, 2011 13:33:14 GMT -5
I don't think i have fuzz. Here it is. Here is a stock vic #4 after a wolf got done with it. That dang wolf just pulled this trap apart. However, I have a cure for that.   after mods I take a stock Victor #4 and remove the spring pin and the coil springs. Drill out the holes in the levers and base to1/4 dia. hole. I take the #4s and put on 1/4 inside lams, Base plate and center swivel, 1/4 spring pin, Mb750 wolf and cougar springs on the dog side and stock #4 spring as helpers. I also put on a heavy dog that is made out of 1/8x 1/4 bar stock. I make under pan springs and have them set at 4 lbs. I put on 36" of chain with 4 swivels.These traps are now wolf proof. I think.  |
|
|
|
Post by white316 on May 5, 2011 18:16:44 GMT -5
Nice piece of hardware.
|
|
|
|
Post by nightrider on May 6, 2011 6:42:07 GMT -5
Never seen springs get bent like that before.
|
|
