|
|
Post by white316 on Mar 16, 2011 7:33:32 GMT -5
Glad you liked it.
|
|
|
|
Post by white316 on Mar 20, 2011 15:43:34 GMT -5
 Got some more square buckets. |
|
|
|
Post by wolf1199 on Mar 20, 2011 17:00:27 GMT -5
Same buckets i pick up at Safeways supermarket, i just love those buckets for hauling my marten bait around on the bike. Square buckets pack a lot nicer then round one,s on the bike.
|
|
|
|
Post by fuzz269 on Mar 20, 2011 23:16:12 GMT -5
Ya them square pails are the handiest for every thing from haulin grain to the critters to storring bait.
|
|
|
|
Post by white316 on Mar 21, 2011 7:11:12 GMT -5
The buckets are free i just have to clean them out.
|
|
|
|
Post by white316 on Mar 22, 2011 14:57:25 GMT -5
Got to try out my new winch with a fresh coon. I need to weld wider grips on the vice-grips. Other than that it worked good.  |
|
|
|
Post by sneakysnake on Mar 22, 2011 16:33:09 GMT -5
Glad the winch worked well for you. Did it seem to save time and muscle strain for you? I also noticed that you cut the front feet off, did that help?
|
|
|
|
Post by white316 on Mar 22, 2011 20:51:42 GMT -5
As for being the first 1 i ever did with a winch i went a little slower than normal,but i let the winch do all the pulling and i like it.
I always cut the front legs off its the first thing i do.
|
|
|
|
Post by maxwell on Mar 23, 2011 7:27:26 GMT -5
Looks to be doing a fine job.
|
|
|
|
Post by white316 on Mar 23, 2011 15:01:45 GMT -5
    This is the dog proof trap i have been working on. What makes it dog proof is it has a pull trigger not a push. Every piece i made except the tube. I have all the jigs made,,to make every piece the same. Thats what takes all the time,,saves a lot of money making them your self. |
|
|
|
Post by white316 on Mar 23, 2011 15:12:20 GMT -5
 Here are the swivels i'm making that i will use on these dog proof raccoon traps. I like to make my own stuff. |
|
|
|
Post by sneakysnake on Mar 23, 2011 15:43:26 GMT -5
I am not trying to discourage you, but I have read where several folks have lost traps because the heads popped off the nail. If I were you, I might drive a couple in a board and then pull them out to see how good they are. Good Luck
|
|
|
|
Post by white316 on Mar 23, 2011 16:16:29 GMT -5
Thanks for the heads up H.
I will change them or go bigger.
|
|
|
|
Post by wolf1199 on Mar 23, 2011 17:35:53 GMT -5
Good advice Harold and job well done White, they look impressive. And so does your skinning machine.
|
|
|
|
Post by white316 on Mar 24, 2011 7:32:40 GMT -5
Thanks Rob.
|
|
