|
|
Post by sneakysnake on Feb 12, 2011 12:12:09 GMT -5
What tools, jigs and gizmos have you designed to make your trapline easier. Please enclose a photo. I will get something up as soon as I take some pic's
|
|
|
|
Post by white316 on Feb 12, 2011 19:01:45 GMT -5
Cable stake driver  Fleshing tool  |
|
|
|
Post by white316 on Feb 12, 2011 19:05:01 GMT -5
Tail stripper  safty gripper  Setters  |
|
|
|
Post by sneakysnake on Feb 12, 2011 20:04:20 GMT -5
Wow, Nice jobs there white. I like your coni setters. They have a deep cut out, Mine are always slipping off and smashing my fingers or thumb... Good Job man
|
|
|
|
Post by white316 on Feb 12, 2011 21:35:08 GMT -5
|
|
|
|
Post by sneakysnake on Feb 12, 2011 21:54:49 GMT -5
I have a similar jig that I use to make whammys and swivels. I will get a pic of it up tomorrow
|
|
puppa
Junior Member
Posts: 48
|
Post by puppa on Feb 13, 2011 8:16:49 GMT -5
Nice work there white316. I have a flesher that looks identical to yours. I used 1/8 flatbar and sharpened one edge. I used heater hose for the handles. I think I am going to switch the handles to wood for better grip when greasy. What is your knife made from?
|
|
|
|
Post by white316 on Feb 13, 2011 8:59:57 GMT -5
Nice work there white316. I have a flesher that looks identical to yours. I used 1/8 flatbar and sharpened one edge. I used heater hose for the handles. I think I am going to switch the handles to wood for better grip when greasy. What is your knife made from? Its a planer blade and its sharp. |
|
|
|
Post by robocop on Feb 14, 2011 23:18:28 GMT -5
I made a J hook jig,,but i can't get the J hooks to turn out right. any help.  |
|
|
|
Post by white316 on Feb 15, 2011 9:01:47 GMT -5
I think fuzz had a pic up some where of his jig.
|
|
