|
|
Post by kbbgood on Mar 4, 2011 19:09:21 GMT -5
I have some Montgomery dogless #4 traps with bent levers due to time I guess. One so bad I can't set the trap anymore. Does anyone have a fix for them or does anyone sell replacements for them or will like victor or somebody else's levers work on them? What can I do about them?
|
|
|
|
Post by fuzz269 on Mar 4, 2011 20:21:03 GMT -5
I am not sure if it will help, but do you have pixs of them? might help some one come up with a plan for ya, that is if some one doesnt sell the parts you need.
|
|
|
|
Post by white316 on Mar 4, 2011 21:26:51 GMT -5
Post a few pic's might be able to help.
|
|
|
|
Post by kbbgood on Mar 30, 2011 10:23:53 GMT -5
Can't, no cam. Problem is the side the spring is on is twisted up. Was wondering if other levers would work or if revercing them would work. Found out that bridger #3 levers will work on #3 and 4 montys and #2 bridgers will work on #2 montys as well as the jaws also.
|
|
|
|
Post by sneakysnake on Mar 30, 2011 15:17:36 GMT -5
I have in the past had twisted levers on some #3's. I just clamped them in a vice and twisted them back in to shape. Also, if the are real bad, you may have to take the trap apart so you and straighten and then put a straight edge to the full length of the lever. Be patient, you can bring them back.
|
|
